Filter
Top Products
Installing PCI cards
Issue 3.3 February 2003 207
9. Add or remove the card as shown in the following figure.
10. Remove the ESD wrist strap.
11. Reattach the cover.
12. Reconnect the AC power cord.
13. Turn on all external SCSI devices starting with the device farthest from the system and
working toward the system.
14. Turn on the system monitor.
15. Turn on the system.
16. Press Stop+A simultaneously after the console banner is displayed, but before the
system starts booting.
17. Enter:
boot -r
This reboots the system so that it recognizes the new configuration.
18. Perform a CMSADM file system backup to back up the updated system configuration.
See your CMS software installation, maintenance, and troubleshooting document for
details.
PCI card
Screw
PCI slot 1
PCI slot 3
PCI slot 2
u5_pcicard.cdr
PC riser
board