Maintaining disk drives
Issue 3.3 February 2003 91
Closing the computer
If you are also replacing the secondary internal data disk drive, do not close the computer.
Continue with Adding or replacing the internal EIDE data disk drive
on page 93.
To close the computer:
1. If you removed the PCI card from Slot 2 earlier, reinstall it now.
2. Reconnect the AC power cord to the computer.
3. Detach the ESD wrist strap.
4. Replace the cover on the computer. Slide the cover forward until it fits snugly around
the chassis.
5. Replace the two cover screws.
Tip:
Tip : Install each screw with just a few turns before you tighten both screws.
6. Do one of the following:
● If you are adding or replacing external SCSI disk drives, continue with Adding or
replacing external SCSI disk drives on page 102.
● If you are not adding or replacing external SCSI disk drives, continue with Turning
on the system on page 92.