Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
88 Avaya P330-ML Reference Guide
The syntax for this command is:
set port dot1x quiet-period
<module/port> <seconds>
Example:
set port dot1x re-authenticate
User level: supervisor
Use the set port dot1x re-authenticate command to set the port to re-
authenticate.
The syntax for this command is:
set port dot1x re-authenticate
<module/port>
Example:
set port dot1x re-authentication
User level: supervisor
Use the set port dot1x re-authentication command to set the re-
authentication mode per port.
The syntax for this command is:
set port dot1x re-authentication
<module/port> <mode>
module/
port
Module and port number (or range of ports)
seconds Number of seconds – 0 to 65535
P330-1(super)# set port dot1x quiet-period 4/2 300
module/
port
Module and port number (or range of ports)
P330-1(super)# set port dot1x re-authenticate 1/2
port 1/2 is not in authenticating process
module/
port
Module and port number (or range of ports)
mode enable | disable