Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 133
The syntax for this command is:
show cam vlan <vlan-number>
Example:
show cascading fault-monitoring
User level: user, privileged, supervisor
Use the show cascading fault-monitoring command to display the status of
the fault trap sending mode for cascading links.
The syntax for this command is:
show cascading fault-monitoring [<mod_num>]
Example:
vlan-number The VLAN on which the MAC addresses were learned.
P330-N# show cam vlan 1
Please be patient.
Gathering and displaying the information might take a
while.
Dest MAC/Route Dest Destination Ports VLAN
------------------- ----------------- ----
08-00-20-c4-c8-51 1/8 1
08-00-20-c6-98-5f 1/8 1
00-01-02-9b-ee-ae 1/8 1
00-01-02-dd-2f-9f 1/8 1
00-02-2d-47-00-6f 1/8 1
...
...
...
00-50-da-74-71-93 1/8 1
00-50-da-de-75-ca 1/8 1
00-60-08-96-25-20 1/8 1
Total Matching CAM Entries Displayed = 138
P330-N>show cascading fault-monitoring 1
Module 1 cascading-down fault monitoring enabled.
Module 1 cascading-up fault monitoring enabled.