Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
98 Avaya P330-ML Reference Guide
Example:
set port redundancy
User level: privileged, supervisor.
Use the set port redundancy command to globally enables or disable the port
redundancy pairs you have defined. Using this command will not delete from
NVRAM the existing redundancy entries.
The syntax for this command is:
set port redundancy {enable|disable}
Example:
set port redundancy on/off
User level: privileged, supervisor.
Use the set port redundancy command to defines or remove redundancy pairs. A
port redundancy member can be any port (including LAG logical port) that is not a
member of a LAG or another redundancy scheme.
The syntax for this command is:
set port redundancy <module>/<prim_port>
<module>/<second_port> {on/off} [<redundancy_name>]
priority Critical, High, or Low
Router-N# set port powerinline priority 2/3 HighLoad
Powering priority on port/s 2/3 was set to High
P330-N# set port redundancy enable
All redundancy schemes are now enabled
prim_port Primary port of the redundancy scheme
second_port Secondary port of the redundancy scheme
redundancy_name
(Optional)
Name for the redundancy scheme