Filter
Top Products
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 239
Example:
ping
User level: user, privileged, supervisor
Use the ping command to send ICMP echo request packets to another node on the
network.
L You can use this command via the master switch only.
L The command is executed until you
The syntax for this command is:
ping <host> [<interval> [<size> [<timeout> [<source
address>]]]]]
Example: to ping the IP number 149.49.48.1 three times:
prompt-length
Router-N(configure)# ip simulate 100 192.67.85.12
193.76.54.25
host Host IP address/Internet address of route destination. If missing
then the last host IP is used.
interval Interval between ping commands in seconds (1 to 256)
size Size of packet in bytes (22 to 66500)
timeout Timeout in seconds (1 to 10)
source
address
IP address of one of the router interfaces
Router-N> ping 149.49.48.1 3
PING 149.49.48.1: 56 data bytes
64 bytes from 149.49.48.1: icmp_seq=0. time=0. ms
64 bytes from 149.49.48.1: icmp_seq=1. time=0. ms
64 bytes from 149.49.48.1: icmp_seq=2. time=0. ms
----149.49.48.1 PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/0