Filter
Top Products
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
252 Avaya P330-ML Reference Guide
Example:
show ip arp
User level: user, privileged, supervisor
Use the show ip arp command to display the Address Resolution Protocol (ARP)
cache.
The syntax for this command is:
show ip arp [<if-name> | <vlan> | <ip addr> | <ip-mask> static]
Example:
L If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
Router-N> show ip access-list-summary
The policy lists summary:
default List (0)
if-name Interface name (string up to 32 chars)
vlan VLAN NAME (string up to 16 chars) or VLAN ID (number)
ip-addr The IP address of the station(s)
ip-mask The ip mask of the routes.
static Display static ip ARP information.
Router-N> show ip arp
Showing 3 rows
Address MAC Address Interface Type TTL
--------------- ----------------- ------------ ------- --------
192.168.54.1 00:40:0d:8c:12:01 mgmt Dynamic 14360
192.168.2.33 00:40:0d:5c:14:01 loco Static Not Aged
192.168.1.111 00:40:0d:5d:72:01 ppp Static Not Aged