Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 63
The syntax for this command is:
P330-N> set dot1x max-req <count>
Example:
set dot1x quiet-period
User level: supervisor
Use the set dot1x quiet-period command to set the minimal time between
authentication attempts.
The syntax for this command is:
set dot1x quiet-period <Seconds>
Example:
set dot1x re-authperiod
User level: supervisor
Use the set dot1x re-authperiod command to set the idle time between re-
authentication attempts.
The syntax for this command is:
set dot1x re-authperiod <Seconds>
Example:
set dot1x server-timeout
count Number of attempts – 1 to 10
P330-1(super)# set dot1x max-req 3
Seconds Number of seconds – 0 to 65535
P330-1(super)# set dot1x quiet-period 90
Done!
Seconds Number of seconds – 0 to 65535
P330-1(super)# set dot1x re-authperiod 90
Done!