Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 205
The syntax for this command is:
snmp-server informs retries <retries-num> timeout <seconds>
Example:
snmp-server remote-user
User level: supervisor
Use the snmp-server remote user command to configure a remote-user as a
target for SNMP notifications.
The syntax for this command is:
snmp-server remote-user <username> <engineID> <groupname>
{ v1 | v2c | v3 } [auth {md5 | sha} <auth-password>
[priv des56 <priv-password>]]
retries-num Maximum number of times to resend an inform request.
seconds Number of seconds to wait for an acknowledgment before
resending. The default is 3.
P330-N>snmp-server informs retries 5 timeout 30
Done!
username Variable that specifies the name of the SNMP user. The
maximum length is 32 bytes.
engineID The remote SNMP engineID. The SNMP engineID is a 12 byte
string represented as hexadecimal numbers separated by the
colon character.
For example, 00:00:00:81:0a:fe:ff:12:97:33:45:12.
groupname Variable that specifies the name of the SNMP group. The
maximum length is 32 bytes.
v1, v2c, v3 The security model assigned to the user in user to group
association.
auth
(Optional)
A keyword signifying that an authentication password is
required.
md5, sha Keyword that specifies authentication protocol, either
HMAC-SHA-96 or MAC-MD5-96.
priv-
password
The privacy password. Valid lengths are 8 - 64 characters.