Filter
Top Products
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
248 Avaya P330-ML Reference Guide
show device-mode
User level: user, privileged, supervisor
L This command does not apply to the P333R-LB which is always in “Load
Balancing” mode.
Use the show device-mode command to show the current switch operating
mode. Possible modes are Router or Switch.
The syntax for this command is:
show device-mode
Example:
show download status
User level: user, privileged, supervisor
L This command applies the P330-ML-ML switches only.
Use the show download status command to display a summary of the last
software download operation.
The syntax for this command is:
show download status [slot]
Example:
show erase status
User level: user, privileged, supervisor
Use the show erase status command to view the status of the erase
Router-N> show device mode
Device mode is router
P330-N>show download status 1
Module #1
===========
Module : 1
Source file : c:\session4.txt
Destination file : module-config
Host : 149.49.75.100
Running state : Idle
Failure display : SCP - Server refused
Last warning : No-warning
Bytes Downloaded : 0