Filter
Top Products
Index of Layer 2 CLI Commands
298 Avaya P330-ML Reference Guide
rmon alarm 55
rmon event 56
rmon history 56
S
session 57, 242
set allowed managers 58
set allowed managers ip 58
set arp-aging-interval 59
set arp-tx-interval 59
set autopartition 60
set boot bank 199
set cascading 61
set device-mode 61
set inband vlan 65
set intelligent-multicast 65
set intelligent-multicast client port pruning
time 65
set intelligent-multicast group filtering delay
time 66
set intelligent-multicast router port pruning
time 66
set interface inband 67
set interface outband 67
set interface ppp 67
set interface ppp enable/disable/off/reset 68
set intermodule port redundancy 69
set intermodule port redundancy off 70
set internal buffering 70
set ip route 71
set license 71
set logging file condition 72
set logging file disable 74
set logging file enable 74
set logging server 74
set logging server access-level 75
set logging server condition 75
set logging server disable
77
set logging server enable 77
set logging server facility 78
set logging session condition 79
set logging session disable 80
set logging session enable 80
set logout 81
set outband speed 82
set port auto-negotiation-flowcontrol-adver-
tisement 82
set port channel 83
set port classification 84
set port disable 84
set port duplex 89
set port enable 91
set port flowcontrol 91
set port level 92
set port mirror 93
set port name 94
set port negotiation 94
set port redundancy 96, 97
set port redundancy on/off 97
set port redundancy-intervals 99
set port security 99
set port spantree 99
set port spantree cost 99
set port spantree priority 101
set port speed 101
set port static-vlan 102
set port trap 103
set port vlan 103
set port vlan-binding-mode 104
set ppp authentication incoming 105
set ppp baud-rate 106
set ppp chap-secret 106
set ppp incoming timeout 106
set radius authentication retry-time 109
set radius authentication secret 110
set radius authentication server 110
set radius authentication udp-port 110
set security mode 112
set security violation 112
set snmp community 113
set snmp retries 113
set snmp timeout 114
set snmp trap 114
set snmp trap auth 115
set spantree 116
set spantree priority 118
set system contact 119, 120, 244, 245
set system location 120, 245
set system name 121, 246