Filter
Top Products
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 259
show ip route best-match
User level: user, privileged, supervisor
Use the show ip route best-match command to display a routing table for a
destination address.
The syntax for this command is:
show ip route best-match <dst addr>
Example:
show ip route static
User level: privileged, supervisor.
Use the show ip static route command to display the static routes.
The syntax for this command is:
show ip route static [<ip addr> [<mask>] ]
Example:
dst addr IP address
Router-N> show ip route best-match 199.93.0.0
Searching for: 199.93.0.0
Showing 1 rows
Network Mask Interface Next-Hop Cost TTL Source
--------------- ------------------------------------------------ -----
199.93.0.0 255.255.0.0 e-135new 135.64.76.1 1 n/a STAT-HI
ip-address The IP address of the routes
mask The ip mask of the routes.
Router-N> sh ip route static
Showing 34 rows
Network Mask Interface Next-Hop Cost Pref Active
------------- ------------ --------------- --------------- ---- ---- -----
10.0.8.0 255.255.255.0 e-36 149.49.36.11 1 high Yes
135.0.0.0 255.0.0.0 e-135new 135.64.76.1 1 high Yes
135.64.0.0 255.255.0.0 e-135 135.87.164.1 1 high No
149.49.0.0 255.255.0.0 trial 10.10.254.253 1 low Yes
149.49.2.0 255.255.255.0 n/a v-Route-FW 1 1 high Yes