Filter
Top Products
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 281
ip redirects
User level: privileged, supervisor.
Use the ip redirects command to enables the sending of redirect messages on
the interface.
Use the no ip redirect command to disable the redirect messages. By default,
sending of redirect messages on the interface is enabled.
The syntax for this command is:
[no] ip redirect
Example:
ip rip authentication key
User level: privileged, supervisor.
Use the ip rip authentication key command to set the authentication
string used on the interface.
Use the no ip rip authentication key command to clear the password.
The syntax for this command is:
[no] ip rip authentication key <password>
Example:
To set the authentication string used on the interface “marketing” to be “hush-
hush”.
Router-N(config-if:marketing)#ip redirects
password The authentication string for the interface. Up to 16 characters are
allowed.
Router-N(configure-if:marketing) # ip rip authentication
key hush-hush