Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 139
The syntax for this command is:
show internal buffering [<mod_num>]
Example:
show ip access-group
User level: privileged, supervisor.
Use the show ip access-group command to display the active policy-list
number.
L This command applies to the P334T-ML only when it is in device mode
"Layer2".
The syntax for this command is:
show ip access-group <policy-list-number>
Example:
show ip access-list details
User level: user, privileged, supervisor
L This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the show ip access-lists details command to view complete data of a
policy list (including DSCP and composite operation tables).
mod_num Switch number. If you do not specify a number then
the internal buffering for all switches in the stack will
be displayed.
P330-N>show internal buffering 1
Module Internal Buffer
------ ---------------
1 med
policy-
list-
number
A valid id number for a policy list currently defined for the module.
P330-1(super)# show ip access group 1011
access-group 101