Filter
Top Products
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
258 Avaya P330-ML Reference Guide
show ip reverse-arp
User level: user, privileged, supervisor
Use the show ip reverse-arp command to display the IP address of a host,
based on a known MAC address.
The syntax for this command is:
show ip reverse-arp <mac addr> [<match len>]
Example:
show ip route
User level: user, privileged, supervisor
Use the show ip route command to display information about the IP unicast
routing table.
The syntax for this command is:
show ip route
mac addr MAC address
match len The number of bytes in the address to match
Router-N> sh ip reverse-arp 00:10:a4:98:97:e0
Showing 1 rows
Address MAC Address I/F Type TTL
--------------- ----------------- ----------- ------- --------
149.49.70.68 00:10:a4:98:97:e0 e-70 Dynamic 14355
Router-N> show ip route
Showing 2 rows
Network Mask Interface Next-Hop Cost TTL Source
--------------- --------------- ------------ --------------- ----- --- ---------
0.0.0.0 0.0.0.0 net 149.49.54.1 1 n/a STAT-LO
149.49.54.0 255.255.255.0 net 149.49.54.56 1 n/a LOCAL