Filter
Top Products
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
272 Avaya P330-ML Reference Guide
The syntax for this command is:
terminal {width|length} [<characters>]
Example:
traceroute
User level: user, privileged, supervisor
Use the traceroute command to initiate a traceroute to a remote host.
The syntax for this command is:
traceroute <host>
Example:
validate-group
User level: privileged, supervisor.
Use the validate-group command to verify that all the rules in a policy list are
valid.
L If there is a configuration problem with a specific rule, or with a number of
rules, detailed error messages will be given.
The syntax for this command is:
validate-group <policy-list-number>[quiet]
Example:
Router-N> terminal width 80
terminal width: 80
host IP address.
Router-N> traceroute 192.168.50.13
quiet does not display error messages
Router-1(configure)# validate-group 101
List 101 is valid