Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
122 Avaya P330-ML Reference Guide
set system name
User level: privileged, supervisor.
Use the set system name command to set the mib2 system name MIB variable.
The syntax for this command is:
set system name [string]
Example:
L If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
set terminal recovery password disable
User level: supervisor
Use the set terminal recovery password disable command to disable
the recovery password feature.
L This command can only be run from the console port on the device.
L If the recovery password feature is disabled and you forget your login and
password, you will not be able to access the device.
The syntax for this command is:
set terminal recovery password disable
Example:
set terminal recovery password
User level: supervisor
Use the set terminal recovery password enable command to enable the
recovery password feature.
string • The system name string should be typed inside inverted
commas.
• The name is cleared if you leave this field blank.
P330-N# set system name “P330-ML-1”
*** Set system name ***
system name set
P330-N# set terminal recovery password disable
Done!