Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
90 Avaya P330-ML Reference Guide
set port dot1x supp-timeout
User level: supervisor
Use the set port dot1x supp-timeout command to set the time for the port to
wait for a reply from the Authentication Server before the session is terminated.
The syntax for this command is:
set port dot1x supp-timeout
<module/port> <seconds>
Example:
set port dot1x tx-period
User level: supervisor
Use the set port dot1x tx-period command to set the time interval between
attempts to access the Authenticated Station.
The syntax for this command is:
set port dot1x tx-period
<module/port> <seconds>
Example:
set port duplex
User level: privileged, supervisor.
Use the set port duplex command to configure the duplex type of an Ethernet
or Fast Ethernet port or range of ports. You can configure Ethernet and Fast
Ethernet interfaces to either full duplex or half duplex.
module/
port
Module and port number (or range of ports)
seconds Number of seconds – 0 to 65535
P330-1(super)# set port dot1x supp-timeout 1/2 400
module/
port
Module and port number (or range of ports)
seconds Number of seconds — 0-65535
P330-1(super)# set port dot1x quiet-period 1/2 5000