Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
208 Avaya P330-ML Reference Guide
L The stack is reset once the command has been executed.
L You should not load the stack with traffic during this test.
L Please follow the instruction shown on the CLI screen, during the various stages
of this test.
The syntax for this command is:
stack health
Example:
sync time
User level: privileged, supervisor.
Use the sync time command to synchronize the time used by all modules in the
switch.
The syntax for this command is:
sync time
Example:
tech
User level: supervisor
Use the tech command to enter tech mode. This command is reserved for service
personnel use only.
telnet
User level: user, privileged, supervisor
Use the telnet command to open a Telnet session to a remote host.
P330-N>stack health
TThis operation will eventually result in a Stack reset.
- do you want to continue (Y/N)? y
Start testing stack health....
This test will take a few minutes!!
The stack health test was completed successfully
P330-N# sync time
Time has been distributed.