Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 43
Example:
ip ssh enable
User level: supervisor
Use the ip ssh command to enable the SSH server.
The syntax for this command is:
ip ssh enable
Example:
ip telnet enable
User level: supervisor
Use the ip telnet enable command to enable Telnet access to the device.
The syntax for this command is:
ip telnet enable
Example:
source source ip address
destination destination ip address
protocol ip | tcp | udp | integer (1...255)
source port integer (1...65535)
destination port integer (1...65535)
established value of TCP established bit
Router-N(configure)# ip simulate 100 192.67.85.12
193.76.54.25
P330-N# ip ssh enable
Done!
P330-N# ip telnet enable
Done!