Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 71
set intermodule port redundancy off
Use the set intermodule port redundancy off command to clear the
intermodule port redundancy scheme.
The syntax for this command is:
set intermodule port redundancy off
Example:
set internal buffering
User level: privileged, supervisor.
L This command is not relevant to P330-ML-ML switches. It appears in the P330-
ML-ML CLI for controlling internal buffering of other P330-ML switches in the
stack.
The set internal buffering command allows you to set the size (Maximum,
Medium, and Minimum) of the Receive (Rx) buffer allocated to each port of the
specified switch. This command is meaningless when any port of the switch is
operating with flow control ON.
The syntax for this command is:
set internal buffering <module> {value}
Example:
P330-N# set intermodule port redundancy off
Intermodule port redundancy entry deleted.
module Module number in the stack
value max - sets the internal receive buffer to its maximum size
med - sets the internal receive buffer capacity dynamically
min - sets the internal receive buffer to its minimum size
Default is min
P330-N# set internal buffering 1 max
Done.