Filter
Top Products
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
278 Avaya P330-ML Reference Guide
ip netbios-rebroadcast
User level: privileged, supervisor.
Use the ip netbios-rebroadcast command to set the NETBIOS rebroadcasts
mode on an interface.
Use the no ip netbios-rebroadcast command to disable NETBIOS
rebroadcasts on an interface.
The syntax for this command is:
[no] ip netbios-rebroadcast [<direction>]
The possible values for direction are:
Example:
To enable rebroadcasting of netbios packets received by and sent from the interface
“marketing”:
ip ospf authentication-key
User level: privileged, supervisor.
Use the ip ospf authentication-key command to configure the interface
authentication password.
Use the no ip ospf authentication-key command to remove the OSPF
password.
The syntax for this command is:
[no] ip ospf authentication-key <key>
Example:
both Netbios packets received on the interface rebroadcasted to
other interfaces and netbios packets received on other
interfaces are rebroadcasted into this interface. This is the
default value.
disable Netbios packets are not rebroadcasted into or out of this
interface.
Router-N(config-if:marketing)# ip netbios-rebroadcast both
key string (up to 8 characters)
Router-N(configure-if:marketing) # ip ospf authentication-
key my_pass