Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 157
Example:
Output Fields
show module-identity
User level: user, privileged, supervisor
Use the show module-identity command to display the switch identity
required for acquiring a license.
The syntax for this command is:
show module-identity [module]
Example:
P330-N>show module
Mod Type C/S S/N Statuses
--- ------------------ ---- -------- ----------------------------
1 P333T 1.0 4144162 PS:OK Fans:OK Mode:Layer2
X330GT2 2.0
P330-MLSTK 2.0 Conn-Up:Fail Conn-Down:Ok
BUPS BUPS:Not Prsnt Fans:None Type:None
2 P333T-PWR 3.0 4455428 PS:OK Fans:OK Mode:Layer2
No Expansion Not Present
P330-MLSTK 2.2 Conn-Up:Ok Conn-Down:Ok
BUPS BUPS:Not Prsnt Fans:None Type:None
Mod Switch number
Type Switch/Expansion module type
C/S Hardware Configuration Symbol of the
switch/expansion module
S/N Serial number of the switch
Status Status of the switch (and expansion module)
P330-N>show module-identity
Mod Module Identity
--- ---------------
1 1234567
2 4144162