Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 113
set secure mac
User level: privileged, supervisor.
Use the set secure mac command to add a unicast MAC address into the CAM
table of a secured port.
The syntax for this command is:
set secure mac <mac-address> port <mod-num>/<port-num>
Example:
set security mode
User level: privileged, supervisor.
Use the set security mode command to enable or disable MAC security at the
stack level. When enabled, the ports are secured based on their individual
configuration. When disabled, all the ports in a stack are non-secured.
The syntax for this command is:
set security mode {enable|disable}
Example:
set security violation
User level: user, privileged, supervisor
Use the set security violation command to specify the security violation
action to be taken.
L This command is only available on P330-ML-ML switches.
P330-1(super)# set secure mac 00-02-03-04-04-05 port 1/1
Port 1/1 port security enabled with 00-02-03-04-04-05 as
the secure mac address
P330-1(super)# set security mode enable
Security mode enabled.