Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 85
The syntax for this command is:
set port channel [<port_list>] [<value>] [<name>]
L If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
Example:
set port classification
User level: privileged, supervisor.
Use the set port classification command to set the port classification to
either regular or valuable. Any change in the Spanning Tree state from Forwarding
for a valuable port will erase all learnt MAC addresses in the stack.
The syntax for this command is:
set port classification [module/port] {regular|valuable}
Example:
set port disable
User level: privileged, supervisor.
Use the set port disable command to disable a port or range of ports.
port_list A list of ports to be aggregated in the format module/port
value on or off – enables or disables the channel for the specified
module ports
name Channel name
P330-N# set port channel 1/5-6,8 on my-channel
Port 1/5 channel mode set to on 1/102
Port 1/6 was added to channel 1/102
Port 1/8 was added to channel 1/102
module port module/port range
regular | valuable port classification
P330-N# set port classification 2/19 valuable
Port 2/19 classification has been changed.