Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
124 Avaya P330-ML Reference Guide
Example:
set time server
User level: privileged, supervisor.
Use the set time server command to set the TIME server address.
The syntax for this command is:
set time server <ip address>
Example:
set timezone
User level: privileged, supervisor.
Use the set timezone command to assign a timezone name and sets the time
difference of the device relative to the Coordinated Universal Time (UTC / GMT).
The minutes parameter can only be set to 30.
The syntax for this command is:
set timezone <zone-name> [-]<hours>[:30]
Example:
P330-N>set time protocol sntp-protocol
The protocol has been set to SNTP protocol
P330-N> set time protocol time-protocol
The protocol has been set to TIME protocol
ip address IP address of the TIME server.
P330-N# set time server 192.49.53.68
The Server Ip has been set to 192.49.53.68
zone-name Three-character name of time zone, for example, EST, GMT
hours The difference between the time zone and GMT
P330-N# set timezone EST -5
Timezone set to “EST”, offset from UTC is -5 hours.