Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 101
set port spantree disable
User level: privileged, supervisor.
Use the set port spantree disable command to disable the spanning tree
mode for specific switch ports.
The syntax for this command is:
set port spantree disable [module/port]
Example:
set port spantree enable
User level: privileged, supervisor.
Use the set port spantree enable command to enable the spanning tree
mode for specific switch ports.
The syntax for this command is:
set port spantree enable [module/port]
Example:
set port spantree force-protocol-migration
User level: privileged, supervisor.
Use the set port spantree force-protocol-migration command to set
the port as an RSTP port (and not as common STA port). It forces the port to send a
rapid spanning tree BPDU.
Module Module number
Port Port number
P330-N# set port spantree disable 3/1
port 3/1 was disabled on spantree
Module Module number
Port Port number
P330-N# set port spantree enable 3/1
port 3/1 was enabled on spantree