Filter
Top Products
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
232 Avaya P330-ML Reference Guide
Example:
ip access-list-name
User level: privileged, supervisor.
Use the ip access-list-name command to set a name for a policy list.
The syntax for this command is:
ip access-list-name <policy-list-number> <name>
Example:
L If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
ip access-list-owner
User level: privileged, supervisor.
Use the ip access-list owner command to set the owner for a specific policy
list.
The syntax for this command is:
ip access-list-owner <policy-list-number> <owner>
Router-N(configure)# ip access-list-dscp trust 100 trust-
dscp
Done!
<policy-list-number> integer (100 - 149)
<name> list name
Router-N(configure)# ip access-list-name 101 morning
<policy-list-number> integer (100 - 149)
<owner> list owner