Filter
Top Products
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 215
clear ip traffic
User level: privileged, supervisor.
L This command does not apply to the P333R-LB.
Use the clear ip traffic command to clear the ip traffic statistics counters.
The syntax for this command is:
clear ip traffic
Example:
clear screen
User level: user, privileged, supervisor
Use the clear screen command to clear the screen.
The syntax for this command is:
clear screen
clear vlan
User level: privileged, supervisor.
L If you are at the ”privileged” level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter Configure mode if
necessary.
Use the clear vlan command to delete a Router layer 3 VLAN.
The syntax for this command is:
clear vlan [<ifIndex>] | [name <ifname>]
Example:
L If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
Router-N# clear ip traffic
ifIndex VLAN number
ifname VLAN name
Router-N(configure)# clear vlan 2 name vlan2