Filter
Top Products
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 225
Example:
fragment timeout
Use the fragment timeout command to set the maximum number of seconds to
reassemble a fragmented IP packet destined to the router. Use the no form of this
command to set the fragment timeout to the default value (10).
L The router does not perform reassembly of packets in transit.
The syntax for this command is:
[no] fragment timeout
<timeout>
Example:
help
User level: user, privileged, supervisor
Use the help command to obtain help on CLI commands.
The syntax for this command is:
help <command>
Router-N# fragment size 150
timeout The maximum number of seconds to re-assemble an IP packet,
from 5 to 120. The default is 10.
Router-N# fragment timeout 30
command A specific CLI command or group of commands