Avaya P330-ML-ML Switch User Manual


 
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
218 Avaya P330-ML Reference Guide
Example:
copy running-config startup-config
User level: privileged, supervisor.
Use the copy running-config startup-config command to save the policy
and router configurations to the startup configuration file in the NVRAM.
The syntax for this command is:
copy running-config startup-config
Example:
copy running-config tftp
User level: privileged, supervisor.
Use the copy running-config tftp command to upload the active policy and
router configurations to a TFTP server.
The syntax for this command is:
copy running-config tftp <filename> <ip>
P330-N# copy running-config scp c:\config\switch1.cfg 192.168.49.10 5
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show upload status' command
********************************************************************
* If you are currently running the P330-ML Device Manager
application,*
* it is recommended to exit from it before performing configuration*
* download operations. *
********************************************************************
Router-N(super)# copy running-config startup-config
filename Destination file name in the tftp server (full path).
ip The ip address of the tftp server.