Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
72 Avaya P330-ML Reference Guide
set ip route
User level: privileged, supervisor.
Use the set ip route command to add a route to the IP routing table. You can
configure from 1 to 10 default static gateways for a P330-ML switch.
The syntax for this command is:
set ip route <destination> <gateway>
Example:
This example shows how to add a default route to the IP routing table:
set license
User level: privileged, supervisor.
Use the set license command to activate the SMON and Routing capabilities
of the Avaya P330-ML stack. An Avaya P330-ML stack can include several Avaya
P330-ML switches. One SMON license is required per Avaya P330-ML stack; a
routing license is required for each P330-ML-ML switch in the stack.
For a full description of the SMON or Routing License and the installation
procedure please refer to the Installation Guide provided with the SMON/Routing
License.
destination IP address of the network, or specific host to be added
gateway IP address of the router
P330-N# set ip route 0.0.0.0 192.168.1.1
destination = 0.0.0.0 gateway = 192.168.1.1
ROUTE NET TABLE
destination gateway flags Refcnt Use Interface
------------------------------------------------------------------------
0.0.0.0 192.168.1.1 1 1 3199 se0
127.1.1.0 127.1.1.1 1 8 7606 se1
------------------------------------------------------------------------
ROUTE HOST TABLE
destination gateway flags Refcnt Use Interface
------------------------------------------------------------------------
127.0.0.1 127.0.0.1 5 2 131 lo0
10.10.10.10 192.168.1.1 7 0 0 se0
------------------------------------------------------------------------