Filter
Top Products
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 209
The syntax for this command is:
telnet <ip-address> [<port-number>]
Example:
terminal
User level: user, privileged, supervisor
Use the terminal width and terminal length commands to set the width
and length of the terminal display in characters.
The syntax for this command is:
terminal {width|length} [<characters>]
Example:
username
User level: supervisor
Adds a local user account.
L By default there is only a single user account, named 'root', with password
'root', which access the administrator level. You cannot delete this basic user
account, nor can you modify its access level. You can modify its basic password.
The syntax for this command is:
username <name> password <passwd> access-type {read-only|read-
write|admin}
ip-address The IP address of the remote host.
port-number The port number over which to open the Telnet connection.
P330-N>telnet 149.22.38.127
Router-N> terminal width 80
terminal width: 80
name New user name (minimum four characters)
passwd User’s password (minimum four characters)
access-type Access type definition - read only, read-write or
administrator