Filter
Top Products
Installing the CAPT Software
3-19
Setting Up the Printing Environment
3
For Windows 2000
Installing from the CD-ROM
IMPORTANT
Do not connect the USB cable before the installation. The installation will be failed.
Connect the USB cable at the appropriate point during the installation (Step 11
➞
p.
3-22).
1
Press the power switch to turn OFF the printer.
2
Turn ON the computer and start up Windows 2000.
3
Log on as an Administrator.
NOTE
Full Control Permission is required for the installation of the printer driver.
4
Insert the "User Software for LBP-2410" CD-ROM into the
CD-ROM drive.
If the CD-ROM is already in the drive, take it out and insert it again.
The CD-ROM Menu will appear automatically.
IMPORTANT
If the CD-ROM Menu does not appear automatically, select [Run] under the [Start]
menu, enter "D:\English\CNAC1MNU.exe", and click [OK].
(The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive
name may differ depending on the computer being used.)