Filter
Top Products
xvii
CAUTION
• Do not use power supplies with voltages other than those specified herein, as this
may result in a fire or electrical shock.
• Always grasp the power plug when disconnecting the power cord. Pulling on the
power cord may expose or snap the core wire, or otherwise damage the power cord.
If the power cord is damaged, this could cause current to leak, resulting in a fire or
electrical shock.
• Leave sufficient space around the power plug so that it can be unplugged easily. If
objects are placed around the power plug, you will be unable to unplug it in an
emergency.
Handling
WARNING
• Do not attempt to disassemble or modify the printer. There are high-temperature and
high-voltage components inside the printer which may result in a fire or electrical
shock.
• Electrical equipment can be hazardous if not used properly. To avoid injury, do not
allow children access to the interior of any electrical product and do not let them
touch any electrical contacts or gears that are exposed.
• If the printer makes strange noises, or emits smoke, heat or unusual smells,
immediately turn OFF the main power switch, and unplug the power plug from the
outlet. Then, contact your service representative or the shop that you purchased this
product. Continued use of the printer in this condition may result in a fire or electrical
shock.
• Do not use highly flammable sprays near the printer. If gas from these sprays comes
into contact with the electrical components inside the printer, it may result in a fire or
electrical shock.
• To avoid damage to the power cord and creating a fire hazard, always turn OFF the
main power switch, and unplug the interface cable when moving the printer.
Otherwise, the power cord or interface cable may be damaged, resulting in a fire or
electrical shock.
• Do not drop paper clips, staples, or other metal objects inside the printer. Also, do
not spill water, liquids, or flammable substances (alcohol, benzene, paint thinner,
etc.) inside the printer. If these items come into contact with a high-voltage area
inside the printer, it may result in a fire or electrical shock. If these items are dropped
or spilled inside the printer, immediately turn OFF the main power switch, and
disconnect the power cord from the power outlet. Then, contact your service
representative or the shop that you purchased this product.
• When unplugging the USB cable while the power switch is ON, do not touch the metal
part of the connector. This may lead to electrical shock.
CAUTION
• Do not place heavy objects on the printer, as they may tip over or fall resulting in
personal injury.
• When handling the expansion board be careful not to cut your hands by touching the
corner and sharp parts.