Filter
Top Products
xviii
• Turn off the main power switch for safety when the printer will not be used for a long
period of time such as overnight. Also, turn the main power switch on the left of the
printer and unplug the power plug for safety when the printer will not be used for an
extended period of time such as during consecutive holidays.
• The laser beam can be harmful to human bodies. Since radiation emitted inside the
product is completely confined within protective housings and external covers, the
laser beam cannot escape from the printer during any phase of user operation. Read
the following remarks and instructions for safety.
- Never open covers other than those instructed in this manual.
- Do not remove the caution label attached to the cover of the laser scanner unit.
- If the laser beam escapes from the printer, exposure may cause serious damage to
your eyes.
Maintenance and Inspections
WARNING
• When cleaning the printer, first turn off the main power switch, then unplug the power
plug. Failure to observe these steps may result in a fire or electrical shock.
• Disconnect the power cord from the power outlet regularly, and clean the area around
he base of the power plug's metal pins and the power outlet with a dry cloth to ensure
that all dust and grime is removed. If the power cord is connected for a long period of
time in a damp, dusty, or smoky location, dust can build up around the power plug
and become damp. This may cause a short circuit and result in a fire.
• Clean the printer using a slightly dampened cloth with a mild detergent mixed with
water. Do not use alcohol, benzene, paint thinner, or other flammable substances.
Check detergent for flammability prior to use. If flammable substances come into
contact with a high-voltage area inside the printer, it may result in a fire or electrical
shock.
• There are some areas inside the printer which are subject to high-voltages. When
removing jammed paper or when inspecting the inside of the printer, do not allow
necklaces, bracelets, or other metal objects to touch the inside of the printer, as this
may result in burns or electrical shock.
• Do not burn or throw used toner cartridges and drum cartridge into open flames, as
this may cause the toner remaining inside the cartridges to ignite, resulting in burns
or a fire.
- RAYONNEMENT LASER INVISIBLE EN CAS D OUVERTURE.
EXPOSITION DANGEREUSE AU FAISCEAU.
-
UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GE FNET.
NICHT DEM STRAHL AUSSETZEN.
- RADIAZIONE LASER INVISIBLE IN CASO DI APERTURA.
EVITARE L ESPOSIZIONE AL FASCIO.
- RADICION LASER INVISIBLE CUANDO SE ABRE.
EVITAR EXPONERSE AL RAYO.
- AAVATTAESSA OLET ALTTIINA N KYM TT M LLE
LASERS TEILYLLE. L KATSO S TEESEEN.
- OSYNLIG LASERSTR LNING N R DENNA DEL R PPNAD.
BETRAKTA EJ STR LEN.
- USYNLIG LASER STR LING, N R DENNE ER BEN.
UNDG BESTR LING.
- USYNLIG LASERSTR LING, N R DEKSEL PNES.
UNNG EKSPONERING FOR STR LEN.
ATTENTION
VORSICHT
ATTENZIONE
PRECAUTION
VARO!
VARNING!
ADVARSEL!
ADVARSEL
DANGER
CAUTION
- Invisble laser radiation when open.
AVOID DIRECT EXPOSURE TO BEAM.
- INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
RS5-8169