Filter
Top Products
Lines or colors are misaligned
Lines or colors are misaligned
Cause Corrective Action
The Printhead is not being aligned cor-
rectly.
Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.520
(See "Manual Adjustment to Straighten Lines and Colors.") ➔P.522
In the Control Panel menu, use a lower Head Height setting.
(See "Troubleshooting Paper Abrasion and Blurry Images.") ➔P.524
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") ➔P.339
(See "Loading Sheets in the Printer.") ➔P.360
Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
Borders appear in borderless printing
Borders appear in borderless printing
Cause Corrective Action
The paper selected for borderless printing at ac-
tual size was wider than the actual page size.
For borderless printing at actual size, use roll paper that has the same width as
the actual page size.
(See "Borderless Printing at Actual Size.") ➔P.65
The printing image data has margins. Check that the printing image data does not have any objects like crop marks
and transparent objects.
Margins are configured in the application software
you are using.
Check that no margins are configured in the application software you are using.
BordlessOversize is set to Little in the Control
Panel menu.
Set BordlessOversize to Standard in the Control Panel menu.
(See "Menu Settings.") ➔P.446
Lines or colors are misaligned
iPF8400SE
User's Guide
Troubleshooting Problems with the printing quality
600