Filter
Top Products
Interface
Hi-Speed USB Format Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Connector Series B (4-pin)
Ethernet Format Internal port
Specification IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3x Full Duplex
Protocols IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP (Canon-MIB compati-
ble), HTTP, TCP/IP (IPv4/IPv6), AppleTalk
Ink
For information on the ink the printer supports, see "Ink Tanks." ➔P.534
Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displaying
the Paper Reference Guide.") ➔P.330
Paper width For information on the paper widths the printer supports, see "Paper Sizes." ➔P.326
Minimum paper length 203.2 mm (8.0 in)
Maximum printable length (*1) Rolls 18 m (19.7 yd)
Sheets 1,600 mm (63.0 in)
Thickness Rolls 0.07–0.8 mm (0.0028–0.031 in)
Sheets 0.07–0.8 mm (0.0028–0.031 in)
Roll maximum outer diameter 150 mm (6 in) or shorter
Supported paper core inner diameter 2 inches / 3 inches
Print area For details, see "Print Area." ➔P.631
*1: Varies depending on the operating system or application.
Print Area
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in border-
less printing, the actual printing area corresponds to the paper size minus the space for this margin.
Note
• Printable Area: The area that can be printed.
• There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.
• Recommended Print Area: We recommend printing within this area.
• To print so that your original matches the print area exactly, use an oversized paper size that includes the required
margin. (See "Printing on Oversize Paper.") ➔P.61
Margins of Printable Area Margins of Recommended Print Area
Top Edge Bottom Edge Sides Top Edge Bottom Edge Sides
Sheets 5 mm (0.20 in) 23 mm (0.91 in) 5 mm (0.20 in) 20 mm (0.79 in) 23 mm (0.91 in) 5 mm (0.20 in)
Rolls 0/5 mm (0/0.20 in) 0/5 mm (0/0.20 in) 0/5 mm (0/0.20 in) 20 mm (0.79 in) 5 mm (0.20 in) 5 mm (0.20 in)
iPF8400SE
Print Area
User's Guide
Specifications Printer Specifications
631