Filter
Top Products
Item Details Default Setting
Use Zeroconf Func-
tion
Activate this setting to use Bonjour. On
IP Address Specify the printer's IP address. 0.0.0.0
Subnet Mask Specify the printer's subnet mask. 0.0.0.0
Gateway Address Specify the printer's default gateway. 0.0.0.0
LPD Printing Activate this setting to use LDP Printing. On
IPP Printing Activate this setting to use IPP Printing. On
IPP Printer URI Specify the URI of the printer used for IPP printing using up to 252 charac-
ters.
printer
RAW Printing Activate this setting to use Raw Printing. On
RAW Mode Bi-direc-
tion
Activate this setting to use Raw mode bidirectional communication. Off
FTP Printing Activate this setting to use FTP Printing. On
Use Discovery Activate this setting to use SLP Discovery function. On
Scope Enter the SLP search range. default
SMTP Server Ad-
dress
Specify the SMTP server's IP address.
You can also specify the SMTP server domain name, if desired.
0.0.0.0
Primary DNS Server
Address
Specify the IP address of the primary DNS server. 0.0.0.0
Secondary DNS
Server Address
Specify the IP address of the secondary DNS server. 0.0.0.0
DNS Host Name Specify the printer host name, up to 63 characters (1–63 characters). Use
single-byte letters, numbers, and - (hyphens). Do not use numbers or - for
the first character or - for the last character.
NB-18GBipxxxxxx
DNS Domain Name Specify the printer domain name, up to 63 characters. Use single-byte let-
ters, numbers, - (hyphens), and . (periods). Do not use numbers, -, or . for
the first character, or - or . for the last character.
blank
Multicast DNS Serv-
ice Name
Specify the printer's Multicast DNS service name. (1–63 characters)
This name will be displayed when Bonjour functions are used.
Canon iPFxxxx
(xxxxxx)
6
Click OK to display the Network page.
Note
• If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that supports
such protocol running in the network.
• If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this method
is used first. If you cannot obtain the IP address, the address specified in IP Address is used.
• It takes up to two minutes to determine whether DHCP, BOOTP, or RARP are available. We recommend clearing
check boxes of options you will not use.
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers
and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain
Name, respectively.
When using an IPv6 IP address
1
Start the web browser and enter the following URL in the Location (or Address ) box to display the Remo-
teUI page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
Configuring the Printer's TCP/IP Network Settings With RemoteUI
iPF8400SE
User's Guide
Network Setting Initial Settings
482