Filter
Top Products
Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot adjust printhead. ..............................................................................................................................................624
Borderless printng not possible. Paper stretched or shrank. ...................................................................... 622
Before borderless printing, move the blue platen switch. ............................................................................. 622
Borderless printng not possible. ............................................................................................................................... 618
Blue platen switch is dirty. ........................................................................................................................................... 622
Move the blue platen switch No.xx to the right. (xx represents a number) ........................................... 622
Cannot adjust paper feed. ........................................................................................................................................... 622
Check printed document. ............................................................................................................................................ 623
Borderless printng not possible. Paper stretched or shrank.
Borderless printng not possible. Paper stretched or shrank.
Cause Corrective Action
The loaded roll has expanded or contracted due to environmen-
tal conditions, making it wider or narrower than the supported
width for borderless printing.
Press the OK button to stop printing.
Use each type of paper only where the recommended environ-
mental conditions are met. For details on environmental condi-
tions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") ➔P.330
Before borderless printing, move the blue platen switch.
Before borderless printing, move the blue platen switch.
Cause Corrective Action
The blue Switch on the platen was set to the side oppo-
site ● when a borderless print job was received.
Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.") ➔P.596
Blue platen switch is dirty.
Blue platen switch is dirty.
Cause Corrective Action
The blue Switch on the platen is dirty. Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.") ➔P.564
Move the blue platen switch No.xx to the right. (xx represents a number)
Move the blue platen switch No.xx to the right. (xx represents a number)
Cause Corrective Action
The printer has detected that the blue Switch on the platen nee-
ded in maintenance during printing is set away from the ● mark.
Set blue platen Switch of the indicated number toward the ● side.
(See "Setting the Blue Switch on the Platen.") ➔P.596
Cannot adjust paper feed.
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.") ➔P.545
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.") ➔P.546
4.
Execute Adj. Quality again.
(See "Automatic Banding Adjustment.") ➔P.527
Highly transparent film is loaded that cannot be
used for automatic feed amount adjustment.
Press the OK button to clear the error, and then adjust the feed amount manually.
(See "Manual Banding Adjustment.") ➔P.528
Borderless printng not possible. Paper stretched or shrank.
iPF8400SE
User's Guide
Error Message Messages regarding printing or adjustment
622