Filter
Top Products
Messages regarding printheads
Messages regarding printheads
Cannot adjust printhead. ..............................................................................................................................................624
Wrong printhead. ............................................................................................................................................................. 624
Printhead error. ................................................................................................................................................................ 624
Cannot recognize print head. ..................................................................................................................................... 624
Execute printhead cleaning. ........................................................................................................................................ 625
Cannot adjust printhead.
Cannot adjust printhead.
Cause Corrective Action
The Printhead nozzles are
clogged.
Execute Head Posi. Adj. again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.") ➔P.545
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.") ➔P.546
4.
Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.520
The Printhead cannot be
aligned; highly transparent film
is loaded.
Press the OK button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjustment.
(See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.520
Wrong printhead.
Wrong printhead.
Cause Corrective Action
An incompatible Printhead has been installed. Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.") ➔P.547
Printhead error.
Printhead error.
Cause Corrective Action
There is a problem with the Printhead. Follow these steps to replace the Printhead.
1.
Open the Top Cover.
2.
Replace it with a new Printhead.
(See "Replacing the Printhead.") ➔P.547
Follow these steps to replace the Printhead.
1.
Turn off the printer, wait a while, and then turn it on again.
2.
Open the Top Cover.
3.
Replace it with a new Printhead.
(See "Replacing the Printhead.") ➔P.547
Cannot recognize print head.
Cannot recognize print head.
Cause Corrective Action
No Printhead is installed. Follow these steps to install the Printhead.
1.
Open the Top Cover.
2.
Install the Printhead.
(See "Replacing the Printhead.") ➔P.547
The Printhead cannot be recognized because it is not installed correctly. Follow these steps to reinstall the Printhead.
1.
Open the Top Cover.
Cannot adjust printhead.
iPF8400SE
User's Guide
Error Message Messages regarding printheads
624