Filter
Top Products
Setting Details
Automatic Cutting Settings
•
User Cut:Cutting is not performed by the cutter unit. Cut the roll paper using scis-
sors after each sheet. Select this for paper that cannot be cut by the cutter unit.
Drying Time Specify the time that the printer waits for ink to dry, as needed.
•
Off:Ejects immediately after printing finishes.
•
30 sec./1 min./3 min./5 min./10 min./30 min./60 min.:Ejects after the specified time
has elapsed after printing finishes.
Borderless Printing Configures whether or not to permit borderless printing.
•
Permit: Borderless printing is permitted.
•
Deny: Borderless printing is denied.
Important
• Depending on the paper, there are types that cannot be cut by the cutter unit, and types that speed
deterioration of the blade and cause damage to the cutter. For thick paper, hard paper, etc. do not use
the cutter unit, and instead cut the roll paper using scissors, etc. after printing. In this case, select User
Cut as the Automatic Cutting Settings.
• If borderless printing is performed on paper where the ink drying is poor, the cutter unit may leave
scratches where it touches the printed surface, or may not cut correctly. In this kind of situation, config-
ure the amount of time to wait for the ink to dry after printing using Drying Time. Alternatively, if the
paper cannot be cut well by the cutter, set the Automatic Cutting Settings to User Cut and cut the roll
paper using scissors, etc.
• Paper where borderless printing can be performed is limited by the media type and roll paper width. Re-
fer to "Compatible Paper" ➔P.413 .
• For custom paper where there is a need to set the Automatic Cutting Settings to User Cut, set the
Borderless Printing to Deny.
10
The Step 5: Configure the amount of ink used dia-
log box is displayed.
The upper limit on the amount of ink used to print to
the custom paper is set on this screen by selecting
from among several levels.
First, click the Test Print button to perform a test
print of each level.
Note
• If a standard paper that does not display the Name in Printer Driver is selected in the screen in Step 5,
you cannot perform test prints or configure the maximum amount of ink to use.
iPF8400SE
Add Custom Paper
User's Guide
Handling and Use of Paper Media Configuration Tool (Mac OS)
417