Filter
Top Products
Item Details
Default Set-
ting
NCP Burst Mode This mode supports fast data transfer when printing in queue server
mode. Normally, leave the setting On.
On
Print Application Choose the print service.
The print service selected here is enabled. Multiple print services can-
not be enabled simultaneously.
•
Bindery PServer
•
RPrinter
•
NDS PServer
•
NPrinter
NDS PSer-
ver
Packet Signature Select If Requested by Server to use packet signature. If Reques-
ted by
Server
Bindery PSer-
ver
File Server Name Specify the name of a file server that has a NetWare print server.
(0–47 characters)
—
Print Server
Name
Specify the name of a NetWare print server.
(0–47 characters)
—
Print Server
Password
Set a password for the print server.
(0–20 characters)
—
Polling Interval Specify the interval to confirm jobs.
(1–15 seconds)
5
RPrinter Print Server
Name
Specify the name of a NetWare print server.
(0–47 characters)
—
Printer Number Specify the number of the printer connected to the NetWare print serv-
er.
(0-15)
0
NDS PServer Tree Name Specify the name of an NDS tree that has a NetWare print server.
(0–32 characters)
—
Context Name Specify the name of a context that has a NetWare print server.
(0–255 characters)
—
Print Server
Name
Specify the name of a NetWare print server.
(0–64 characters)
—
Print Server
Password
Set a password for the print server.
(0–20 characters)
—
Polling Interval Specify the interval to confirm jobs.
(1–255 seconds)
5
NPrinter Print Server
Name
Specify the name of a NetWare print server.
(0–47 characters)
—
Printer Number Specify the number of the printer connected to the NetWare print serv-
er.
(0-254)
0
7
Complete the following settings based on the selected service.
•
If you have selected Bindery PServer: Queue Server Mode (Using a Bindery Print Server)
1.
In File Server Name, enter the file server name.
2.
In Print Server Name, enter the name of the print server created in "Specifying NetWare Print
Services" ➔P.487 .
3.
In Print Server Password, enter the password of the print server created in "Specifying NetWare
Print Services" ➔P.487 .
4.
In Polling Interval, specify the interval at which the printer checks the NetWare print queue.
Configuring the Printer's NetWare Network Settings With RemoteUI
iPF8400SE
User's Guide
Network Setting NetWare Settings
490