Filter
Top Products
CHAPTER
5-1
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
5
Service Configuration
Setting up a Frame Relay Connection
A Frame Relay connection can be setup either from Cisco WAN Manager (CWM) or via the MGX 8220
command line interface.
Via Cisco WAN Manager
Setting up a Frame Relay connection is normally performed from CWM using the Connection Manager
graphical user interface (GUI). An example of the CWM screen used for making an MGX 8220 Frame
Relay connection is shown in Figure 5-1. For full details of how to set up a connection, refer to the Cisco
WAN Manager Operations Guide.