Cisco Systems MGX 8220 Switch User Manual


 
Notice to Users of T1 Services
1. The device must only be connected to the T1 network connected behind an FCC Part 68 registered channel
service unit. Direct connection is not allowed.
2. Before connecting your unit, you must inform the telephone company of the following information:
SOC:6.0N FIC: 04DU9-ISN
3. If the unit appears to be malfunctioning, it should be disconnected from the telephone lines until you learn if
your equipment or the telephone line is the source of the trouble. If your equipment needs repair, it should not
be reconnected until it is repaired.
4. If the telephone company finds that this equipment is exceeding tolerable parameters, the telephone company
can temporarily disconnect service, although they will attempt to give you advance notice if possible.
5. Under FCC rules, no customer is authorized to repair this equipment. This restriction applies regardless of
whether the equipment is in or out of warranty.
6. If the telephone company alters their equipment in a manner that will affect the use of this device, they must
give you advance warning so as to give you the opportunity for uninterrupted service. You will be advised of
your right to file a complaint with the FCC.
7. The affidavit must be completed by the installer.
8. User may not under any circumstances (in or out of warranty) attempt any service, adjustment or repairs of this
equipment. For any question or problem regarding this equipment, contact the manufacturer of the
manufacturer’s representative.