Filter
Top Products
8-13
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
Log Codes
2070 HW Error. ADC Mid-range
Calibration Error
ADC mid-range voltage calibration error
occurred.
2071 HW Error. BNM Card NOVRAM
Checksum Error
BNM front card NOVRAM checksum
error occurred.
2072 HW Error. Backplane NOVRAM
Checksum Error
BNM backplane NOVRAM checksum
error occurred.
2080 Cannot allocate memory: Failed to allocate memory. BNM task
running out of memory space.
2081 Line clock update Line clock updated.
2082 Line clock changed to = Line clock changed. Additional
information regarding the specific instance
is displayed.
2096 Line alarm Line alarm trap generated as the line alarm
state bits changed.
2097 Line statistical alarm Line statistics alarm trap generated.
2098 PLCP alarm PLCP alarm trap generated as the PLCP
alarm state bits changed.
2099 PLCP statistical alarm PLCP statistics alarm trap generated.
2100 Function module alarm Function module major alarm trap
generated.
2101 Line module alarm Line module major alarm trap generated.
Back card not present.
2102 ASM alarm Shelf major alarm trap generated.
2112 BRAM Conn Update error in Error occurred while updating BNM
connection information on the BRAM.
2113 BNM mastership change Change in BNM card mastership state.
2114 Mesg from ASC to set
FWREADY =
Received a message from the SMM task to
set the BNM firmware ready.
2115 Line configuration does not
match with BNM card
Line configuration mismatch occurred
with the BNM card.
2116 BNM cardType of the other card
set does not match
Card type of the standby BNM card does
not match with the active card type.
2117 BNM cardType = Information about the BNM card type.
2118 BNM Initialization error, Error occurred while initializing BNM.
Additional information regarding the
specific instance is displayed.
2119 BNM incompatible module, BNM incompatibility error.
Table 8-4 BNM Log Codes (continued)
Error Number Display Log String Detail Description