Filter
Top Products
5-14
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
Configuring IMATM Connections
addbstunroute <port_num><cuaddress><chan_num><lsap>
Configuring IMATM Connections
Download procedure
To download generic firmware
-tftp x.y.z.w /* IP address of IMATM shelf */
-bin
-put imatm_4.0.0x.fw AXIS_SM_1_0.FW
-q
To download boot firmware
-tftp x.y.z.w /* IP address of IMATM shelf */
-bin
-put imatm_BT_4.0.00.fw AXIS_SM_1_<slot#>.BOOT
-q
Adding the Line
Add the lines before doing the clock configuration.
Add the line by entering addln “line no.” Enter the dsplns command to check all the added lines on the
cards.
Sample Display
AXIS18.1.9.IMATM.a > dsplns
dsplns
Line Conn Type Status/Coding Length XmtClock Alarm Stats
Type Source Alarm
---- ----- ------------ ------ -------- ------------- -------- ----- -----
9.1 RJ-48 dsx1ESF Mod/dsx1B8ZS 0-131 ft LocalTim No No
9.2 RJ-48 dsx1ESF Mod/dsx1B8ZS 0-131 ft LocalTim No No
9.3 RJ-48 dsx1ESF Mod/dsx1B8ZS 0-131 ft LocalTim No No
9.4 RJ-48 dsx1ESF Mod/dsx1B8ZS 0-131 ft LocalTim No No
9.5 RJ-48 dsx1ESF Mod/dsx1B8ZS 0-131 ft LocalTim Yes No
9.6 RJ-48 dsx1ESF Ena/dsx1B8ZS 0-131 ft LocalTim Yes No
9.7 RJ-48 dsx1ESF Ena/dsx1B8ZS 0-131 ft LocalTim Yes No
9.8 RJ-48 dsx1ESF Ena/dsx1B8ZS 0-131 ft LocalTim Yes No
LineNumOfValidEntries: 8
<port_num> port number of the BSTUN connection to be routed in the range 1–192
<cuaddress> address of the control unit in the range 0x01–0xFF
<chan_num> channel number of the BSTUN connection to be routed in the range 16–1015
<lsap> number in the range 0x01–0xFF