Filter
Top Products
8-17
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
Log Codes
6054 Line alarm off Line has come out of an alarm. The line number is
displayed.
6055 Line Rx LOS alarm on Line number displayed is in receive LOS alarm.
6056 Line Rx AIS alarm on Line number displayed is in receive AIS alarm.
6057 Line Rx LOF alarm on Line number displayed is in receive LOF alarm.
6058 Line Rx RAI alarm on Line number displayed is in receive RAI alarm.
6061 Invalid ILMI Community
String Received
SNMP community string received through the ILMI
interface is invalid. The received community string is
also displayed.
6062 ILMI ASN1 Parse Error Error while trying to parse the SNMP PDU received.
6063 ILMI Invalid PDU Type SNMP PDU received is unknown. PDU other than
GET, SET, GET-NEXT, and TRAP.
6064 Bad SNMP version number SNMP version in the PDU received is bad.
6065 ILMI - Authentication parse
error
Unable to parse authentication received in SNMP
PDU.
6066 ILMI - Error Build/Send Get
Request Packet
Error while trying to build SNMP GET/SET PDU.
6067 ILMI - Error receiving msg Unable to receive ILMI message.
6068 ILMI - Error Build/Send
Trap Packet
Error trying to build ILMI TRAP PDU.
6069 ILMI - Trap Message Queue
is full
ILMI trap message queue is full.
6070 ILMI - Egress Queue enque
failed
Error while trying to enque ILMI SNMP packet in
egress ILMI queue.
6071 ILMI - Cannot Create
message queues
Unable to create message queue for ILMI task.
6081 Failed to add a line Failed to add line either due to invalid parameter or
line already enabled. Addtional information
describing the specific instance of failure is
displayed.
6082 Failed to delete a line Line trying to be deleted does not exist.
6083 Failed to modify a line Line trying to be modified does not exist or
modification of the parameter is not allowed.
6102 Failed to add a port Failed trying to add port. Additional information
describing the specific instance of failure is
displayed.
6103 Failed to add a channel Failed trying to add channel. Additional information
describing the specific instance of failure is
displayed.
6104 Failed to delete a port Failed trying to delete port. Additional information
describing the specific instance of failure is
displayed.
Table 8-6 AUSM Log Codes (continued)
Error Number Display Log String Detail Description