Filter
Top Products
Figures
xviii
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Figure 4-4 Example FRSM-HS1 Front Card 4-10
Figure 4-5 Using FRASM for a STUN Connection 4-12
Figure 4-6 Using FRASM for a BSTUN Connection 4-13
Figure 4-7 Using FRASM for a FRAS BNN Connection 4-14
Figure 4-8 Example FRASM Front Cards 4-15
Figure 4-9 AUSM Cards 4-18
Figure 4-10 AUSM-8T1/E1 Front Card 4-22
Figure 4-11 IMATM-T3-T1 and IMATM-E3-E1 Front Cards and RJ48-T3T1/E3E1 Back Card 4-23
Figure 4-12 IMATM Application 4-24
Figure 4-13 IMATM Used with Remote MGX 8220 4-25
Figure 4-14 CESM Card 4-27
Figure 4-15 8-Port CESM Cards 4-30
Figure 4-16 T1/E1 Backcards 4-34
Figure 4-17 T1/E1 Redundancy Back Cards 4-35
Figure 5-1 Cisco WAN Manager Connection Manager Screen for the MGX 8220 Shelf 5-2
Figure 5-2 Frame Relay Connection through an MGX 8220 and BPX Network 5-3
Figure 5-3 ATM to-ATM Connection Screen 5-6
Figure 6-1 MGX 8220 Stand-alone Configuration 6-1
Figure 7-1 Mounting Rail Positions 7-6
Figure 7-2 Rack-Mounted MGX 8220—One- and Two-Shelf Configurations 7-7
Figure 7-3 Rack-Mounted MGX 8220—Three-Shelf, Four-Shelf, and Six-Shelf Configurations 7-8
Figure 7-4 Use the Angle Bracket to Secure the Module to the Rack 7-9
Figure 7-5 Keyhole Style Bracket 7-11
Figure 7-6 Electrostatic Wrist Strap Kit 7-12
Figure 7-7 Installed Wrist Strap Kit 7-12
Figure 7-8 Multisystem Racks 7-13
Figure 7-9 48V DC Male Power Receptacle Viewed Facing the Rear of the Shelf 7-14
Figure 7-10 PEM Cable Clamp 7-14
Figure 7-11 DC Power Cabling for One-Shelf and Two-Shelf Racks 7-15
Figure 7-12 DC Cabling for Three-Shelf and Four-Shelf Racks 7-16
Figure 7-13 AC Power Assembly Block Diagram 7-18
Figure 7-14 AC Cabling for One-Shelf and Two-Shelf Racks 7-19
Figure 7-15 AC Cabling for Three-Shelf and Four-Shelf Racks 7-20
Figure 7-16 Cable Management Kit on the Plenum Chamber 7-22
Figure 7-17 Installation of the Cable Management Kit on the Cooling Module 7-23