Filter
Top Products
3-6
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
User Interface Access Ports
Figure 3-4 LAN Port Access to the Cisco MGX 8220 Shelf
In-Band Access
In-band access uses a portion of the bandwidth of the Cisco MGX 8220 shelf to the Cisco BPX T3
connection by reserving a number of ATM virtual connections for network management functions.
• The control terminal (PC or workstation) is connected through the Cisco BPX network and must
support TCP/IP.
• The in-band port on the BNM must have been previously configured with an IP address.
• When using the in-band port to enter CLI commands, the user interface prompt appears after you
perform a Telnet login to the ports IP address.
Figure 3-5 In-band Access Example
ASCBNM
IP
address
LAN
port
MGX 8220
Service
modules
Workstations
Ethernet
H8260
Control
terminal
Control
terminal
Control
terminal
BPX 8620 network
Router
ATM in-band
connection
MGX 8220
BPX 8620
Ethernet
ASCBNM
IP
address
FRSM
H8261
BPX 8620